Dryden WoodMaster Wood Coating, think colour! Dryden WoodMaster is a Decorative low build wood stain. For wood panelling, doors, trim, and cabinets. Particularly recommended for use on hard woods.Dryden WoodMaster gives wood protection where required, e.g. damp rooms, roof constructions and other load-bearing structures Water – repellent, does not crack, peel or blister, easy to apply (Priming and undercoating not necessary, just brush on).WoodMaster is ready for use and re-treatment is simple. WoodMaster decorates and enhances the natural beauty of the wood grain, is available in a wide range of colours, to match the Dryden WoodOil colour range which helps maintain and complement timber character and colour.All colours are intermixable. If a non standard colour is required, a customised architectural interior colour design is available.
Application Tools
Speedbrush, Spray, Brush, Roller, Lint-free cloth, Vacuum line coater
General
Check all products supplied prior to starting against specification documents and colour samples.
Dryden WoodMaster must be used as supplied. Never add thinners or alter it in any way.
Dryden WoodMaster needs to be stirred regularly (with or without Colourtone+ added) to ensure a consistent product and colour is applied. Dryden Colourtone+ will settle out from the Dryden WoodMaster if it is not stirred regularly.
For jobs that require more than one container of the same colour, box all containers together to ensure a consistent colour is achieved.
Always apply the coating at the correct coverage rate.
Coat the board’s full length linearly (do not stop mid-section) and complete individual areas at one time using good coating practices.
When completed, the entire area should be uniform in look and colour (when Dryden Colourtone+ has been used) and free from coating defects.
