Refer to technical datasheet.

Refer to technical datasheet.

Mix the entire contents of Part A thoroughly using a double helical mixing blade and a heavy duty power mixer such as an Intex MegaMixer® AMX 620 until the contents are uniform. Mix part A and part B together with the same power mixer until a thoroughly homogeneous mixture is achieved. While power mixing, scape sidewalls of pail with a long handled metal spatula, drawing the product into the main body of the material.

Transfer the mixed material into a clean container and remix thoroughly before pouring into the stainless steel hopper.

NOTE: A large volume of material will set up quickly if not applied or reduced in volume in a timely manner. Product needs to be gravity fed through a material hopper – material will not feed through a suction tube.

Brush/Roller - Suitable for small areas only. When brushing and rolling additional coats may be required to attain the specified thickness.
Brushes - use high quality synthetic or nylon bristle brushes.

Roller covers - use high quality 10mm or 12 mm synthetic woven nap roller covers.

Refer to technical datasheet.