Porter’s Stucco Wax is a superb blend of fine waxes especially formulated to be used as a protective finish over Porter’s Fresco, Chalk Emulsion and Interior Distemper where improved durability is required.
Touch Dry
30 minutes
Cleaning materials
Pure gum turpentine
Application Tools
Trowel, Other
Please be aware that Stucco Wax may make the applied paint colour appear darker.
Not suitable for use in wet areas.
Do not apply in high humidity, below 10°c or above 30°c.
Complementary products:
Porter’s Stucco Wax is compatible for use over Porter’s Interior Distemper, Porter’s Chalk Emulsion and Porter’s Fresco. Test before use as a slight colour variation may occur.
Do not apply paint if Relative Humidity is above 85% or temperature is within 3°C of Dew Point.
Do not apply if the surface temperature is greater than 30°C or below 10°C, or likely to fall below 10°C during the application or drying period.
Use either of the following methods:
Use A spatula or trowel to apply Stucco Wax sparingly, straight from the can, or use a soft lint free cloth. In both instances ensure Stucco Wax is sparingly and evenly applied.
Before the wax is completely dry buff vigorously by hand with a soft clean cloth, or mechanically with a lamb’s wool buffer.
Walls will be touch dry after buffing, and completely dry after 12 hours. For best results, buff again the following day when the wax has hardened completely.
Application tip: Apply and buff small areas at a time. If the wax is allowed to dry out completely before buffing the job will be very much harder.
