Hamburger Icon WhiteHamburger Icon
Dulux TradeDulux Trade
Login/Signup
Dulux Trade
  • About Dulux
    Dulux My Home website
    Dulux Specifier website
    Privacy Policy
    Terms & Conditions
    Careers
  • Customer service
    Contact Us
    Find a Store
    Sustainability
    Dulux Group Corporate
  • Dulux in the Community
    Surf Life Saving New Zealand
About Dulux
Dulux My Home website
Dulux Specifier website
Privacy Policy
Terms & Conditions
Careers
Customer Service
Contact Us
Shipping & Returns
Find a Store
Sustainability
Media
Dulux Group Corporate
  • © 2026 Dulux

  • Recommended Sites
  • Terms & Conditions
  • Privacy Policy
  • Conditions of Sale
  • Policies & documents
Build: 1.2.37 - Wed, 08 Jul 2026 04:25:55 GMT

Dulux Professional

Water Based Total Prep

SALE OFF

No image preview available

SALE OFF

Dulux Professional

Water Based Total Prep

Loader

About Dulux Professional Water Based Total Prep

Dulux Professional® Preparation Total Prep® is a high quality all-in-one acrylic primer, sealer and undercoat. Suitable for use on most interior and exterior surfaces.

Downloads
Key Points
  • Seals, primes and undercoats
  • High opacity
  • Available in white base
  • Low odour
  • Excellent adhesion
  • Excellent flow and sealing
Quick guide

Cleaning materials

Water

Application Tools

Roller, Brush, Spray

Product specification
Precautions and limitations

All preparation and painting must conform to AS2311: The Painting of Buildings.
Do not overspread or exceed 14.0 square metres per litre per coat. In hot weather, rinse brush every half hour or use two and keep one standing in water. Do not apply if temperature is under 10C, or when temperature of surface may fall below 10C during the drying period, otherwise film formation will not be complete and poor properties will result.

Performance guide
  • Weather: Excellent when used as part of approved system.
  • Heat Resistance: Up to 70C.
  • Water: Excellent when topcoated with approved topcoat.
  • Solvent: Sensitive to aromatic hydrocarbons, alcohols and ketones.
  • Abrasion: Good when topcoated.
Surface preparation
Previously painted surface

All surfaces must be thoroughly clean and free of all loose dirt, grease, mould, surface chalk and loose or flaking paint. New timber surfaces should be sanded smooth and dusted down prior to priming. Fill nail holes, imperfections and cracks with a suitable filler, sand and dust off.

For plaster surfaces use sealer binder as the prep-coat.

Recently viewed products