Ensure all surfaces are clean and dry prior to application. Brush down to remove dust. Stir well with a broad flat stirrer prior to application. Previously painted surfaces, except cement sheet, must be sanded to remove loose, peeling, flaking or chalky paint. Sand all gloss and semi gloss surfaces to a dull finish and wipe down with a damp cloth to remove surface dust. Spot prime bare areas.

Brush, Roller, Conventional or Airless Spray.
Tip Size 0.015 - 0.017"
Pressure: 2200 - 2800 psi.
Thinning: Not normally required. Under hot conditions or on very porous surfaces application may be eased by thinning with up to 100 ml per litre of mineral turpentine.

Airless Spray Advice
Stir contents thoroughly before and during use with a broad, flat stirrer using an upward lifting action. For surfaces of varying texture and porosity use a short nap roller to achieve the most uniform appearance.