Dulux 1Step™ Oil-Based Primer, Sealer & Undercoat is a fast-drying prepcoat suitable for the complete preparation of interior and exterior surfaces.
Touch Dry
30 minutes
Re-coat
1 hour
Cleaning materials
Mineral turpentine
Application Tools
Brush, Roller, Spray
All preparation and painting must conform to AS2311: The Painting of Buildings.
Do not apply if the surface temperature is below 10C or conditions indicate it will fall below 10C during the drying period. Do not apply externally when weather is doubtful, or late in the afternoon during winter, as frost, rain or dew on the uncured undercoat may result in loss of film integrity and impair durability of the system.
All surfaces must be thoroughly dry, clean and free of all loose dirt, surface chalk, grease, mould, mildew and wax, loose or flaking paint. For weathered timber, sand back to fresh timber and dust off. For interior timber, lightly sand and dust off. Can be used on most interior and exterior masonry surfaces but other prepcoats such as Dulux 1 Step Acrylic Primer Sealer Undercoat would be preferable.
New interior set plaster: Use Dulux Sealer Binder.
Brush, roller, conventional or airless spray.
Stir thoroughly before and during use.
Brush/Roller: Apply by brush or roller, full even coats direct from the container. If necessary up to 50ml per litre of mineral turpentine may be added to ease application.
Airless/Conventional Spray: Suitable for application by all standard spray equipment. If necessary thin up to 100ml per litre of DULUX Spraying Thinner to aid atomisation. Clean brushes and rollers with mineral turpentine prior to and after use.
