Thoroughly clean all surfaces free of loose dust, surface chalk, grease, mould, mildew, wax, loose or flaking paint. Wash with sugar soap. Treat mould contaminated areas with antimould. Rinse with clean water. Fill nail holes and cracks with a suitable filler, sand and dust off.
New timber, paperfaced wallboard, plaster, masonry:
Fill imperfections with a suitable filler, sand smooth and dust off.

Brush, roller, conventional and airless spray.
Brush/Roller: Pre-wet brushes and roller with water prior to use. A short or medium nap roller will give most uniform appearance. Apply a full even coat and finish by light parallel strokes with a practically dry roller.

Conventional/Airless Spray: Suitable for application by all standard spray equipment. Stir contents thoroughly before and during use with a broad, flat stirrer using an upward lifting action.