Dulux Professional® Interior\/Exterior Semi Gloss is suitable for use on both interior and exterior substrates. Recommended for use in high wear areas such as hallways, or wet areas such as bathrooms.
Re-coat
2 hours
Cleaning materials
Water
Application Tools
Roller, Brush, Spray
All preparation and painting must conform to AS2311: The Painting of Buildings.
Avoid exposure to steam and condensation for 48 hours after application.
Seven days are required after application to develop maximum hardness and stain removal properties. Most stains and scuff marks can be removed with a sponge wet with detergent solution. Do not use abrasive cleaners.
Do not apply at temperatures below 10C or when the temperature of surface may fall below 10C during the drying period.
Occasionally under steamy conditions an uneven appearance may develop early in the life of the coating. This is easily removed with a damp sponge.
All surfaces must be thoroughly cleaned and free of all loose dirt, dust, grease, loose or flaking paint, and loose surface plaster. Efflorescence or mould on masonry or concrete surfaces must be treated. Flatten gloss surfaces by thoroughly sanding and wipe clean with a damp cloth, then apply primer, sealer or undercoat as required.
