Dulux envirO2™ Ceiling Flat is a very low VOC and low odour premium paint specifically designed for use on ceilings. It contains mould protection to help prevent mould growth. It has high opacity and a flat finish to help hide minor surface imperfections.
Cleaning materials
Water
Application Tools
All preparation and painting must conform to AS2311: The Painting of Buildings.
Do not use at temperatures below 10C,or when the temperature of surface may fall below 10C during the drying period. Not recommended for application at temperatures higher than 28C. Avoid exposure to steam and condensation for 48 hours after application. Not recommended for areas subject to frequent cleaning.
All surfaces must be prepared in accordance with proper trade practices and must be clean and free from dust, dirt, grease and oil.
Previously painted surfaces, except asbestos cement, must be sanded to remove loose, peeling, flaking or chalky paint. Spot prime bare areas.
Note: To avoid dust from asbestos cement sheeting do not sand or scrub. Wash with bleach solution or appropriate de-mossing chemical where necessary. Wash down.
Brush, roller, spray
Stir well before use with a broad, flat paddle using an up and down scooping action. Apply 2 coats of DULUX Professional EnvirO2 Tintable Ceiling Flat. Thin with up to 100ml per litre of water if necessary.
